CO2 DRAGSTER NOTES

PRODUCTION SPECIFICATIONS

(for Div A B and C National Competition and without the CO2 cartridge)

Dragster BodyA. Dragster body length 200 mm 305 mm
B. Dragster body height at rear with wheels 75 mm
C. Dragster body mass / weight with wheels 45 g 170 g
D. Dragster body width at axles – front & back 35 mm 42 mm
E. Dragster Body width (including wheels) 90 mm

Axles / Axle Holes / WheelbaseF. Number of axles 2 2
G. Bottom of axle hole above bottom of dragster 5 mm 10 mm
H. Rear axle hole from rear of dragster 9 mm 100 mm
I. Wheelbase 105 mm 270 mm

Spacers / Washers / ClipsJ. Spacer washers 8
K. Axle clips or similar 8

Power Plant ( CO2 Cartridge Hole)L. Power plant: depth of hole 50 mm 52 mm
M. Power plant: housing thickness (around entire housing) 3 mm
N. Power plant: housing (diameter) Please use a 3/4″ Drill for best results. 19.5 mm 3/4″
O. Power plant: lowest point of chamber diameter to race surface with wheels 26 mm 36 mm

Screw EyesP. Screw eye or eyelet inside diameter 5 mm 8 mm
Q. Screw eyes (2) distance apart at farthest point 155 mm 270 mm

Wheels
R. Wheels: front diameter 32 mm 37 mm
S. Wheels: front width at surface contact point 2 mm 5 mm
T. Wheels: rear diameter 30 mm 40 mm
U. Wheels: rear at surface contact point 15 mm 18 mm

(for DIV. D Outlaw Class National Competition and without CO2 cartridge)

Dragster BodyA. Dragster body length 305 mm
B. Dragster body mass / weight with wheels 45 g
C. Power plant: depth of hole 50 mm 52 mm
D. Power plant: housing thickness (around entire housing) 3 mm
E. Power plant: housing (diameter) Please use a 3/4″ Drill for best results. 19.5 mm 3/4″
F. Power plant: lowest point of chamber diameter to race surface with wheels 26 mm 36 mm
G. Screw eye or eyelet inside diameter 4 mm